Apple Server Diagnostics For Mac
Apple Server Diagnostics tests your server for hardware issues. Apple Server Diagnostics version 3X109 is compatible with Lion server on the Mac Pro (Mid 2010) with Mac OS X Server and Mac mini Server (Mid 2011).
Apple Server Diagnostics For Mac
I intend to use the ASD-3S123 (Apple Service Diagnostic tool specifically for the Mac Pro 3,1 - which I have created on a bootable USB with the suggested EFI and OS boot partitions) using the helpful advice here -service-diagnostics-mac/ - and verified from other qualified sources keen to assist whilst we are in lockdown due to Covid restrictions.
1. Independent Repair Providers have access to genuine Apple parts, tools, training, service guides, diagnostics, and resources. Repairs by Independent Repair Providers are not covered by Apple's warranty or AppleCare plans, but might be covered by the provider's own repair warranty. 2. Self Service Repair provides access to genuine Apple parts, tools, and repair manuals so that customers experienced with the complexities of repairing electronic devices can perform their own out-of-warranty repair. Self Service Repair is currently available in certain countries or regions for specific models of Mac computers introduced in 2020 or later. To view repair manuals and order parts for eligible models, visit the Self Service Repair page.
This version is required if Mac OS X Server 10.4 (Tiger) is being used on a Xserve G5 that will be diagnosed.This version is required if a Xserve G5 that will be diagnosed uses 2GB memory DIMMs. This version adds additional memory tests, and other improvements.This software will only install onto Mac OS X client version 10.3 and later boot volumes, or onto Mac OS X Server version 10.3.3 or later boot volumes.You will be guided through the steps necessary to install this software, which includes:- the xrdiags command line tool- the man page for xrdiags- standard (quick.tdf, extended.tdf, memory.tdf) test files for xrdiags- the hardware test components for Xserve Remote DiagnosticsThis software will only install onto Mac OS X client version 10.3 and later boot volumes, or onto Mac OS X Server version 10.3.3 or later boot volumes.If installing onto a Mac OS X Server boot volume, you must first configure the server for NetBoot before installing this software. Only Xserve G5 computers can NetBoot the installed software. Learn more about Xserve Remote Diagnostics at Using Xserve Remote Diagnostics
Farmers already face this problem, with some turning to cracked Ukrainian firmware and sketchy backroom deals to obtain the software they need to repair equipment. And Paul Luiz, an expert diesel equipment mechanic, told us that he experiences the same problem trying to access engine diagnostics.
A Mid-2012 MacBook Pro cannot run the newer Apple Diagnostics. Instead, it would use the Apple Hardware Test for this purpose. Macs that were made between post 2010 and pre-June 2013 normally run AHT from code which is hidden away in /System/Library/CoreServices/.diagnostics, which often seems to get wiped and not restored when you replace the internal storage, or perform a clean re-install. Not knowing if you had done either of these could be the reason you are seeing this error.
The "/EFI/Drivers/TestSupport.efi" is not referencing anything on your computer's physical drive. It is actually referencing files on a virtual volume downloaded from the Apple servers or the actual files on the Apple server.
Have you tried both holding down the key, and ? The latter would attempt to download the AHT from the Apple servers. The message you see could be indicating that your Mac is having trouble contacting those servers.
Some of our organization's 2012 laptops will boot the online diagnostics while others will not. I haven't had any time to document them to figure out which firmware works and which does not. Or perhaps there is another unknown item in the mix which may be similar to the issue where some Macs won't boot into the proper online macOS installer and will instead default to booting the online macOS installer which originally shipped on the Mac from the factory regardless of the keys used to access Internet Recovery Mode.
Unfortunately there is nothing the user can do to fix this problem. Most likely the user would be unable to even boot the older offline Apple Diagnostics available from this Github page (all the diagnostics are actually downloaded directly from an Apple server, the Github page just collects the links and provides instructions).
I work in the repair shop as the lead technician at my college and our diagnostic server machine is acting up. Our old Mac Mini ran out of space so we transferred everything to an old stock MacBook Pro that we had. However, it gave us a few issues. The EFI tests in diagnostic mode and AST2 work just fine, but the OS tests freeze the Mac being tested at 'waiting for support'. I believe that this is an issue with Diagnostic Server, as that's where the OS-based tools are loaded from. I've reinstalled Diagnostic Server, its images, and Apple Service Utility. Diagnostic Server log says that everything is up and running just fine. I have tried connecting to our network directly, and also by trying a router with the DHCP server set according to TP567 (except with the router instead of Mac OS Server). Nothing we try seems to work, and it's preventing us from finishing repairs due to the inability to complete the trackpad calibration suite. Has anyone else had this issue?
As a result, the simple Apple hardware and diagnostics tests built into your Mac aren't that useful. They test hardware components, but the information gleaned lacks the depth required to make a meaningful diagnosis.
Apple Xserve Diagnostics and Apple Server Diagnostics tools2007-2011Xserver (Early 2008)Mac mini with OS X Server (Mid 2009)Mac mini Server (Late 2010)Mac mini Server (Mid 2011)Xserver (late Fall 2006)Xserver (Early 2009)ASD- 3X109r4-ssps-041-1599-A.dmg - Released 21-Jul-2011ASD-3X108-ssps-022-5092-A.dmg - Released 06-Dec-2010ASD-3X107-ssps-022-4739-A.dmg - Released 21-Oct-2010ASD-3X106-ssps-022-4528-A.dmg - Released 20-Oct-2009ASD-3X104-ssps-022-4142-A.dmg - Released 14-Apr-2009ASD-3X102-ssps-018-2692-A.dmg - Released 26-Sep-2007
I need to do a complete hardware test on some MacBooks and one iMac, that is to do a thorough test of all components GPU, CPU, HDD, ODD, logic board, memory. apple hardware test would suffice however i don't have the option to use it on all the machines. if there is somehow a way to download and run it through say an usb thumb drive, this would be ideal.
The likelihood that a single tool or utility will provide all of the diagnostic capabilities that you are looking for is very slim; if you do happen to find such a utility, there's a decent chance that its support for said capabilities will be shallow. So while it may seem like a good idea to try to find a really generalized and versatile hardware diagnostics app, you'll probably be better off with getting smaller more specialized apps that are designed to only check one to a few of your system's hardware components.
Also, I'd check out Parted Magic and GParted, as well as any other distribution of Linux that offers a Live-disc version. These can be used to ease the diagnostics process since they're (at least Parted Magic and GParted) are designed with system maintenance in mind--not to mention the fact that you'll have access to a far larger software repository with any given Linux (that has a package manager) than you would with brew, for example.
Apple Diagnostics is a simple way to reveal the most common Mac hardware problems. However, sometimes it may not detect particularly rare or specific issues, showing you the No issues found message while the problem exists. In this case, you should contact Apple Support directly or take your Mac to the Apple Store for thorough diagnostics.
With Mac diagnostics, you can effectively detect hardware problems with your hard drive, solid-state drive, RAM, graphics processor, motherboard, and more. This article will explain how to run a diagnostic test on your Mac.
If you exclude software issues on your Mac but it still works incorrectly, then the problem might be connected with the hardware. To detect hardware problems on your Mac, you need to run Apple diagnostics.
@wicker i have adopted this method from Rich and slightly modified for the diagnostic part the firmwarepassword it temporariliy removed, before restart/shutdown to diagnostics a LaunchDaemon is being created which unloads and removes itself after booting up again and it triggers an policy to enable the firmwarepassword directly after the mac comes online
If the Apple hardware diagnostics test determines there is a problem and reports an error, you should write down the error code and any provided details (or take a picture of it with your iPhone) so that you can learn more about the problem. Noting the error code will also help to relay information to an official Apple Technical Support advisor or an Apple Certified Repair center. For Macs with Apple Diagnostics, there is a list of error codes found in Apple Diagnostics here on support.apple.com, whereas Apple Hardware Test error codes are a bit more self explanatory for technically inclined, and they can be searched for on the web to determine a potential match.